Advertisement
Initialization method Soundbar:
1. Set should be plugged in and in Standby Mode.
2.1. Push "Repeat" Button during about 5 seconds, using Remote Controller.
2.2. Or Push + , - Button more than 5 secons at the same time on the UNIT.
3. Front OLED will be Display
INIT
4. Initialization complete.
Reconnection method Soundbar and Subwoofer
1.
Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2.
Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.
The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
•
3.
While the main unit is powered off (in STANDBY mode), press and hold the (Mute) on the remote control for 5 seconds.
4.
The ID SET message appears on the Soundbar's display.
5.
To finalize the link, turn the main unit's power on while the subwoofer's Blue LED blinks.
How to reset Soundbar HW-K650
OK
Advertisement
