Advertisement
How to reset Soundbar HW-N700
Initialization method Soundbar (Using the remote control):
1. Set should be plugged in and in Power ON Mode.
2. Press and hold the "Sound Control" button for more than 10 seconds by using Remote Controller.
3. Front OLED will be Display
INIT
OK
4. If it was successful, "INIT"->"OK" will be displayed for 2 seconds and be turned off.
Initialization method Soundbar (Without using the remote control):
1. Set should be plugged in and switched ON.
2. Press and hold the "+" button and "-" button on Sound Bar simultaneously for 5 seconds.
3. Front OLED will be Display
INIT
OK
4. If it was successful, "INIT"->"OK" will be displayed for 2 seconds and be turned off.
Advertisement
