Overview - Epson S5U1C33001H1400 Manual

2. OVERVIEW

2. OVERVIEW
The S5U1C33001H1400 (In-Circuit Debugger for the S1C33 Family) is a hardware tool (emulator) that
allows software to be efficiently developed for the S1C33 Family of 32-bit Single-Chip Microcomputers. It
provides a software development environment by communicating with the S1C33xxx chip.
This manual primarily explains how to use the S5U1C33001H1400. For details on the debugger (gdb.exe)
functions and commands, refer to the "Debugger" section in the "S5U1C33001C Manual (C Compiler
Package for S1C33 Family)". The figure below shows an external view of the S5U1C33001H.
Note: Do not open the case as it may cause a malfunction.
Precautions before using the S5U1C33001H1400
Please read the sections shown below before getting started with the S5U1C33001H1400. These sections,
especially (2) and (3), describe the answers to frequently asked questions.
(1) "Components Included with Package"
Make sure all of the listed items are included with your package.
(2) "Connecting the S5U1C33001H and the host computer"
Install the USB driver before the S5U1C33001H can be used.
(3) "Connecting the target system"
Please pay particular attention to the Notes.
2
Fig. 1 S5U1C33001H1400 external view
EPSON
S1C33 Family In-Circuit Debugger
S5U1C33001H1400 Manual (Rev. 0.20)