Notes On S5U1C33001H Power Supply; Core Sync Simple Logic Analyzer Function - Epson S5U1C33001H1400 Manual

10. PRECAUTIONS
10.3.8

Notes on S5U1C33001H power supply

When using the S5U1C33001H, install circuit breakers that automatically disconnect both
conductors in the local power mains, and connect the S5U1C33001H power supply line to
a power line protected in that manner.
10.3.9

Core Sync Simple Logic Analyzer Function

This function allows tracing of up to 14 arbitrary signals in the same cycles as the core
clock. The traced information can be displayed with the core status. When using an
evaluation board for development, any signals on the board may be traced. Before internal
signals can be traced, when using an FPGA for development, they should be output from
the unused pins.
A 30-pin cable(*1) is used for tracing. The signals to be traced must be output from DTD7
through DTD0, DTS4 through DTS0, or DBT of the provided 30-pin connector. (Use a
connector conversion board, such as the CK-4 manufactured by Sunhayato Corp., to attach
the 0.5 mm pitch 30-pin connector on the 2.54 mm pitch board.)
For operations of the debugger and the debug commands, refer to the "Debugger" section
in the "S5U1C33001C Manual (C Compiler Package for S1C33 Family)".
*1: The product package does not include a 30-pin cable or the corresponding connector.
Fig. 12 Connection example for tracing user logic signals
40
Please contact us if you need this cable or the corresponding connector.
EPSON
S5U1C33001H1400 Manual (Rev. 0.20)
S1C33 Family In-Circuit Debugger