Use And Operation; Tips For Energy Savings; Cleaning And Care - Klarstein 10028010 User Manual

1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth.
2. Clean the interior with a clean moist cloth.
3. Insert the power supply cord into the socket.
4. Tum the thermostat dial to „5" or „low".
5. Close the door and let the refrigerator and operate it emty for 1-2 hours, before you store any
food inside..
Temperature Control
To control the internal temperature, adjust the thermostat Dial „high" is the warmest Setting to ‚low'
is the coldest The temperature range fur refrigerator is 4.5-15°C. When the temperature is set on
one certain point and the temperature inside reaches this point, the automatic temperature control
system begins to work and the cooling system goes into linear temperature keeping status .
NOTE: Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may fail to operate
properly if restarted too quickly.
Cooling Speed
The temperature inside can be cooled to 4.5°C (Depending on which model) in 2 hours (with the unit
empty). When the temperature control is adjusted, the temperature will be balanced again in a cer-
tain period. The range of the change and the temperature of the environment determine this period.
• Try not to open the door loo often, especially when the weather is wet and hot. Once you open the
door, close it as soon as possible.
• Every now and then check if the appliance is sufficiently ventilated (adequate air circulation around
the appliance).
• Set thermostat from higher to lower settings as soon as possible (depends on how loaded the ap-
pliance is, ambient temperature etc).
• Before loading the appliance with packages of fresh foods, make sure they are cooled to ambient
temperature. For hot foods, please cool to room temperature before placing in the refrigerator.
•
Before cleaning remove the plug from the power outlet. Never use harsh, abrasive claaners, heavy-
duty cleaners, or solvenls on any surface.
Exterior:
Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic waxing use silicon
wax.
Refrigeration Section:
Wash shelves and other removable parts in warm sudsy water. Rinse and dry. Wash interior with
baking soda solution (3 tablespoons to 1 liter of water) or warm sudsy water, rinse and dry.
Magnetic Door Seals:
Wash with warm sudsy Water.
The Finishing Touch:
Replace all parts and retum thermostat dial to desired setting.

Use and Operation

Tips for Energy Savings

Cleaning and Care

8