Shure ANI22 Manual page 26

Equivalent Input Noise
20 Hz to 20 kHz, A-weighted, input terminated with 150Ω
Analog Gain Setting= +0 dB
Analog Gain Setting= +27 dB
Analog Gain Setting= +51 dB
Total Harmonic Distortion
@ 1 kHz, 0 dBV Input, 0 dB analog gain
<0.05%
Common Mode Rejection Ratio
150Ω balanced source @ 1 kHz
>70 dB
Input Impedance
5 kΩ
Output Impedance
150 Ω
Input Clipping Level
Analog Gain Setting= +0 dB
Analog Gain Setting= +27 dB
Analog Gain Setting= +51 dB
Analog Output Level
Selectable
Built-in Digital Signal Processing
Per Channel Equalizer (4-band Parametric, Dante Channels Only), Mute, Limiter, Gain (140 dB range)
System Channel Summing
Networking
Cable Requirements
Cat 5e or higher (shielded cable recommended)
Line
Aux
Mic
-93 dBV
-119 dBV
-130 dBV
+20 dBV
-7 dBV
-31 dBV
0 dB
- 20 dB
-46 dB
Shure Incorporated
26/27