Quick Start - Iridium SHOUT nano User Manual

|

Quick Start

Before use airtime must first be purchased from NAL Research or from any of
Iridium certified airtime resellers. The nano's IMEI number must be registered by
an airtime reseller to ―point‖ to a NOC server. User is recommended to read the
remaining of the manual to learn how to operate the nano as a messaging device.
However, as a tracking device, user can quickly set up the nano with just three
simple steps:
1. Go to Report Rate menu to set the reporting frequency
2. Go to Track On/Off menu to enable tracking
3. Press the power On/Off
IMPORTANT: NAL Research can enable the SHOUT nano for use on the DoD
EMSS Gateway. However, accessing the EMSS Gateway is not authorized until the
nano is provisioned (sign up for airtime). Unauthorized attempts to access the
EMSS Gateway will result in immediate disabling of the offending device, which
must then be returned to NAL Research for repair. Please see webpage
https://sbd.pac.disa.mil
provisioning.
SHOUT nano User's Manual Version 1.0
tracking mode and is ready to send position reports at a rate chosen in
Step 1.
reports. Or, if the power On/Off button is not pressed, the nano will
automatically put itself to sleep after 90 seconds of inactivity.
for more information regarding DoD EMSS service
button to put the nano to ―sleep‖ in between
.
. The nano is now in
16