Settings Menu - Iridium SHOUT nano User Manual

|

Settings Menu

S
The Settings menu allows user to view and configure the SHOUT nano hardware
ETTINGS
settings. There are twelve options available.
Audio
Audio option is used to change the alert frequency and tone, mute incoming
message alert and mute all audio feedback. The
screen if Mute All is on. User can test the audio volume and sound before
selecting by using the Preview soft key.
Contrast
Contrast option is used to change the LCD contrast by pressing the arrow up and
down buttons. Press the enter button to select the setting and press the BACK
button to go back to the Settings menu without change.
Backlight
Backlight option is used to set the period of inactivity after which time the SHOUT
nano turns the LCD backlight off. The nano consumes approximately 40mA less
with the LCD backlight set to Always Off. Setting the backlight to Always On is
recommended for night time use.
LED
The SHOUT nano has a single status LED
whether the device is in tracking mode or emergency mode. The LED flashes once
every five seconds when Track On/Off is enabled and the device sleeps (in
between tracking reports). The LED turns solid green when Emergency mode is
enabled regardless of whether the device is on or off. The LED can be turned off
for either of these two cases to save battery power using the LED option. The
nano consumes approximately 3mA less with the LED disabled during emergency
and 125 A less with LED disabled during tracking mode.
SHOUT nano User's Manual Version 1.0
Iridium
-----
GPS
----
Settings
Audio
on the top left corner to alert user of
icon will appear on the home
31