Installation Instructions; Cleaning Instructions - Drive Raised toilet seat Installation Instructions Manual

installation instructions

1. Remove product from carton and
READ ALL INSTRUCTIONS CAREFULLY
before attempting to install product.
2. Lift toilet lid and seat assembly and place
rear wings of toilet seat around rim of toilet
bowl. (Some toilet bowls may require that
seat assembly be removed to allow proper
fit.) In addition the front adjustment bracket
must clear the rim in order for the raised
toilet seat to fit securely.
3. With raised toilet seat resting correctly on
rim, straighten and center product over toilet
bowl as necessary.
4. Check for secure fit routinely before using
product. User's weight should be centered
over toilet seat, not too forward or too far to
one side, as unit may tip.
5. If you have a style of commode that this
product will not fit properly, it is
recommended that you discontinue usage.

cleaning instructions

1. Use a non-abrasive detergent or household
cleaner with warm water.
2. Rinse with warm water and wipe dry.
3. DO NOT USE AN ABRASIVE CLEANER OR
CLOTH with this product, as damage
may ensue.
caution
1. Always be sure that the seat is correctly and
securely in place before using.
2. Physically challenged users should be
supervised or assisted whenever using
this product.
3. This product is designed for use with the
most common types of commodes. It will
not fit all commode types; be sure that the
unit is correctly installed, fits properly and is
stable before use.