Changing The Detection Areas - Mitsubishi MOTORS GRANDIS Owner's Manual

Starting and driving
CAUTION
!
● The distances given are to be used for reference only,
as errors may be caused by various factors, such as
temperature, humidity, or the shape of the obstacles.
4
4-56

Changing the detection areas

The detection areas can be changed as follows:
Vehicles with a towbar
While the operation of the system is stopped at the SONAR
switch, push the SONAR switch approximately 3 seconds or
more, and release it. The buzzer sounds twice to indicate that
the detection area has been changed.
Vehicles without a towbar
While the operation of the system is stopped at the SONAR
switch, push the SONAR switch approximately 3 seconds or
more, and release it. The buzzer sounds once to indicate that
the detection area has been changed.
NOTE
● The detection area will not change if you keep the
SONAR switch pushed for 10 seconds or more.
E00615800087