Toro 78593 Operator's Manual page 15

7. Remove the hitch pin, cotter pin, and hitch
receiver from the A-frame. Install the hitch pin
and cotter pin to secure the A-frame
Figure 28
1. Hitch receiver
2. Hitch pin
8. Remove the stop brackets
Figure 29
1. Locknut (3/8 inch)
2. Stop bracket
9. Remove both bushing assemblies
(Figure 28).
g246845
3. Cotter pin
(Figure 29).
g250341
3. Carriage bolt (3/8 x 1 inch)
(Figure 30).
1. Bolt
2. Bushing assembly
10. Use the fasteners to store the bushing
assemblies on the left side of the blower frame
(Figure 31).
1. Bolt
2. Bushing assembly
15
Figure 30
3. Nut
Figure 31
3. Nut
g230751
g246867