Table of Contents
Advertisement
Figure 21
1. Kickstand locking pin in
the engaged position
2. Kickstand locking pin in
the disengaged position
5.
Remove the hitch pin and hairpin cotter securing
the blower assembly to the hitch receiver
22).
Figure 22
1. Hairpin cotter
g230843
3. Kickstand in the blower
operating position
4. Kickstand in the blower
storage position
(Figure
g230859
2. Hitch pin
6.
Hold the kickstand and push the release lever
down. Slowly lower the kickstand to the ground.
Note:
Once the lever disengages the hitch pin,
the blower rotates down.
1. Release lever
Raising the Blower
1.
Raise the blower so that it latches on the hitch
receiver
(Figure 24
13
Figure 23
and
Figure
25).
Figure 24
g230858
g230769
Advertisement
Table of Contents
