Table of Contents
Advertisement
6 Monitoring Operation
Display Modes: Normal Mode, Sleep Mode, and User Set Mode
6.1 Normal Mode
The Normal Mode displays the operational status of the light source.
This is the default display after the 3 minute warm-up screen.
"Normal Mode" layout for the display is shown below:
LAMP HOURS = 835
TRANSMISSION = 100%
SHUTTER = OPEN
6.2 Sleep Mode
Sleep Mode can be activated while the unit is in Normal Mode by
holding the green button for 5 seconds until the unit powers off.
Repeat the sequence to awaken the unit. Re-initialization will happen
as the bulb starts up again so the standard 3 minute warm-up will still
apply.
Rev D
14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
