Dynamix 20km 10/100/1000WDM User Manual

5. SPD/TX1000: be light shows twisted-pair
transmit speed is 1000Mbps, extinguish shows
twisted-pair transmit speed less than1000Mbps.
6.TX Link/Act: be light shows twisted-pair link
connected right, fulgurated shows twisted-pair
have data to transmit.
5. Mode choice function
LAN port Link speed would passed AN-DIS switch
may move to:
1.Push down LAN port's Link speed is 1000Mpbs
2.Flip on LAN port Link speed is self-adapt
3.Configure state is Auto Negotiation leave
factory
6. Fiber part parameter
Dynamix -20km
10/100/1000
WDM(A/B)
Connect type
SC
Typical
20 km
distance
Fiber type Single-mode
Wavelength 1310/1550nm
Min TX PWR -6.0 dBm
Max TX PWR 0.0 dBm
Sensitivity <-22 dBm
Link Budget 16.0 dBm
6. Packing
1. Dynamix WDM Gigabit fiber optic media
converter
2. Power adapterAC220V/DC5V
3. User Manual
7. Pay attention to proceeding
1. Optical port working mode is 10/100/1000M Full
Duplex , LAN port is Auto Negotiation.
2. Twisted-pair interface initialization base to couple
equipment state to set self's state. If can't test
opponent state, that state is uncertainty.
3. Strictly prohibit use unaided eye to look at the TX
fiber transmit port when the media converter is electrify
state.
4. Please put dustproof cover on fiber interface, when
the fiber optic media converter is not used.
5. When the product connecting with other
equipment (router, switch, HUB, NIC), the
Dynamix -60km
interconnection equipment's optical interface's
10/100/1000
speed and mode must be consistent (multimode
WDM(A/B)
and single-mode).
SC
Between Interconnection equipment's LAN port's speed
60 km
should mismatch. (1000Base-TX/ 100Base-TX/
Single-mode
10Base-T)
1310/1550nm
0.0 dBm
+2.5 dBm
<-26 dBm
26.0 dBm
www.godynamix.com
Dynamix WDM 10/100/1000M
Gigabit Ethernet
media converter
Dynamix -20km 10/100/1000WDM(A/B)
Dynamix -60km 10/100/1000WDM(A/B)
User Manual
V. 2.2