Advertisement
DS 1.002
DIMENSION DRAWING
Dimensions in mm
Satchwell Control Systems Limited
Farnham Road
Slough
Berkshire SL1 4UH
United Kingdom
Telephone +44 (0)1753 550550
Facsimile +44 (0)1753 824078
A Siebe Group Company
4 - 4
CAUTION
•
This is a mains operated device. Local wiring regulations and usual
safety precautions must be observed.
•
Observe sensor wiring precautions. See DS 2.201, 2.801 or 2.951.
•
Do not short circuit sensor terminals for test purposes.
•
Observe maximum ambient temperature.
•
Interference with those parts under sealed covers renders the guarantee
void.
•
Design and performance of Satchwell equipment are subject to continual
improvement and therefore liable to alteration without notice.
•
Information is given for guidance only and Satchwell do not accept
responsibility for the selection or installation of its products unless
information has been given by the Company in writing relating to a specific
application.
•
A periodic system and tuning check of the control system is recommended.
Please contact your local Satchwell Service Office for details.
© 1984 Satchwell Control Systems Limited (revised February 1999)
All rights reserved. Unauthorised copying of any part of the contents is prohibitied.
Printed in England.
02/99
Advertisement
