Page 1
DS 1.002 02/99 ROOM TEMPERATURE SENSOR with fan speed control switches Specification No. 337-X-XXX* The DRT Room Temperature Sensor incorporating fan speed control switches is used in conjunction with the CZU temperature controller. This system is used for the control of temperature zones of buildings, such as hotel bedrooms or individual offices, which are air conditioned by means of fan coil units.
Page 2
DS 1.002 2 - 4 02/99 SPECIFICATION Adjustable Scale Number of Switch Type Switch Position Switch Function Positions 10 to 35°C • DRT 3801 • DRT 3851 MEDIUM HIGH Sensor Control Range: 10 to 35 ° Sensing Element: Negative temperature coefficient thermistor. Sensor Characteristics: Non-linear.
Page 3
02/99 3 - 4 DS 1.002 CONNECTION DIAGRAMS DRT SWITCH WIRING DRT SENSOR CONNECTIONS Fan Off Indication Common SUPPLY Remote Set Value Fig.1 Remote Set Value + Room Temperature Fig.3 HIGH MEDIUM SUPPLY Fan Off Indication Fig.2 INSTALLATION 1. Select location for sensor which is representative of the space to be controlled and where it will be readily affected by changes in the general space temperature (See Fig.4).
Page 4
Design and performance of Satchwell equipment are subject to continual improvement and therefore liable to alteration without notice. Slough • Information is given for guidance only and Satchwell do not accept Berkshire SL1 4UH responsibility for the selection or installation of its products unless United Kingdom information has been given by the Company in writing relating to a specific application.