Specifications - Sealey SL67S Owner's Manual

Smart Cable LED and Alarm Behavior
BEHAVIOUR
Green LED blinking; Red
LED off; no beep.
Green LED solid; Red
LED off; no beep.
Solid Red LED, Green
LED off; beeps once per
second.
Solid Red LED, Green
LED off; beeps twice per
second.
Alternating Red and
Green flashing LEDs; no
beep.
Solid Red LED, Green
LED off; rapid beeping.
Solid Red and Green
LEDs; no beep.
Solid Red and Green
LEDs; beeps once per
second.
NOTE: When the condition is corrected, the smart cable will
automatically reset.

11. SPECIFICATIONS

Auxiliary output: .............................................................
USB (x2) - 5V/2.4A, 5V/Quickcharge 3.0
Cable & clamp length: ........................................440mm
Capacity: ......................... 10Ah @ 3.2V, 2.5Ah@ 12.8V
Max. current: ..........................................................800A
Max. starting capacity: ......................4L petrol/2L diesel
Size (W x D x H): ............................... 84 x 34 x 173mm
Voltage: ................................................................... 12V
Cable is connected to battery only.
Cable is connected to jump starter
only.
Cable is connected correctly to
both battery and jump starter.
Low voltage protection.
Reverse polarity protection.
Reverse charging protection.
Short circuit protection.
Auto shut-off, due to inactivity.
Disconnect and reconnect clamps
to the vehicle battery.
Temperature protection.
• 11 •
REASON