Sealey SL67S Owner's Manual
  1. Manuals
  2. Brands
  3. Sealey Manuals
  4. Remote Starter
  5. SL67S
  6. Owner's manual

Sealey SL67S Owner's Manual

Power pack 800a peak power - lithium
Hide thumbs
Table of Contents

Advertisement

Quick Links

MODEL NO:
SL67S
Jump Starter Power
Pack 800A Peak Power
- Lithium
PLEASE SAVE THIS OWNER'S MANUAL AND READ
BEFORE USE. This manual will explain how to use
the unit safely and effectively. Please read and follow
these instructions and precautions carefully.
SL67S Issue:2-(5,10) 06/02/20

Advertisement

Table of Contents
loading

Related Manuals for Sealey SL67S

Summary of Contents for Sealey SL67S

  • Page 1 Jump Starter Power Pack 800A Peak Power - Lithium PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE USE. This manual will explain how to use the unit safely and effectively. Please read and follow these instructions and precautions carefully. SL67S Issue:2-(5,10) 06/02/20...

  • Page 2: Table Of Contents

    CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......3 PERSONAL PRECAUTIONS ..........4 PREPARING TO USE THE UNIT ......... 5 CONNECTING TO A BATTERY ........... 5 FEATURES ................6 CHARGING THE JUMP STARTER ........6 OPERATING INSTRUCTIONS ..........7 MAINTENANCE INSTRUCTIONS ........9 STORAGE INSTRUCTIONS ..........

  • Page 3: Important Safety Instructions

    1.5 Use only recommended attachments. Use of an attachment not recommended or sold by Sealey for the SL67S may result in a risk of fire, electric shock or injury to persons or damage to property. 1.6 To reduce the risk of damage to the electric plug or cord, pull by the adaptor rather than the cord when disconnecting the unit.

  • Page 4: Personal Precautions

    2.6 Consider having someone nearby to come to your aid when you work near a lead-acid battery. 2.7 Read the Material Safety Data Sheet available from www.sealey. co.uk. In the event of an accident seek medical attention. 3. PREPARING TO USE THE UNIT WARNING! RISK OF CONTACT WITH BATTERY ACID.

  • Page 5: Connecting To A Battery

    4. CONNECTING TO A BATTERY WARNING! A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE RISK OF A SPARK NEAR THE BATTERY: 4.1 Plug the clamps into the unit, and then attach the output cables to the battery and chassis as indicated below. Never allow the output clamps to touch each other.

  • Page 6: Features

    5. FEATURES 1. Smart cable green and red Display button LEDs. 8. LCD display 2. Smart cable/ 9. Jump start output socket battery clamps 10. LED light 3. ON/OFF switch Not shown: 4. Micro USB input port 11. Micro USB-USB charging for recharging cable (not shown) 5.

  • Page 7: Operating Instructions

    6.2 CHARGING THE INTERNAL BATTERY NOTE: Use a 2A USB charger (sold separately), or a 2A USB charging port to quickly recharge the jump starter. Using a charger with less than 2A will increase charge time. 1. Plug the Micro USB end of the charging cable into the input port.
  • Page 8 7.2 CHARGING A MOBILE DEVICE, USING THE USB PORTS The SL67S includes two USB ports. One provides up to 2.4A at 5V DC; the other is Quick Charge 3.0™, which provides up to 5V at 3A, 9V at 2A or 12V at 1.5A.

  • Page 9: Maintenance Instructions

    charging cable from the unit. Slide the ON/OFF switch to the OFF position. 5. Recharge the unit as soon as possible after each use. NOTE: If no USB device is connected, power to the USB ports will automatically shut off after 30 seconds. 7.3 USING THE LED LIGHT 1.

  • Page 10: Troubleshooting

    TROUBLESHOOTINGJump Starter PROBLEM SOLUTION The jump starter’s display Make sure the unit is charged. will not turn on. Connect to a power source, to reset. Make sure the ON/OFF switch is set to the ON position. The thermometer The unit is too hot or cold. The symbol thermometer symbol will disappear is flashing.

  • Page 11: Specifications

    Smart Cable LED and Alarm Behavior BEHAVIOUR REASON Green LED blinking; Red Cable is connected to battery only. LED off; no beep. Cable is connected to jump starter only. Green LED solid; Red Cable is connected correctly to LED off; no beep. both battery and jump starter.
  • Page 12 Parts support is available for this product. To obtain parts, please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500 ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
  • Page 13 2011/65/EU RoHS Directive This declaration of conformity is issued under the sole responsibility of the manufacturer: Jack Sealey Ltd, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR Declaration of Conformity in accordance with the above Directive(s)� References to harmonised standard(s) EN 55032:2015�����������������������������������������������������������������������������...

Table of Contents