Advertisement
Unplug the appliance before cleaning. Do not use abrasive pads to clean the machine.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
We recommend cleaning The Funnel, Funnel Cover and underside of Powder Container
once per day (if machine is used daily). Follow these steps to clean the machine parts.
1
2
Remove Funnel and
Funnel Cover by pulling
out and down.
4
Wipe underside of powder
container with clean, dry cloth.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The inside of the Water Tank should be cleaned once a month with mild detergent and soft
cloth or sponge. Rinse inside of Water Tank thoroughly before refilling with clean, purified
water. Wipe the outside of the Water Tank with a damp clean cloth.
Never immerse Water Tank or get the electronics in the base of the Water Tank wet.
If the electronics in the base of the Water Tank get wet, allow to air dry thoroughly before
placing back on base. Never place Water Tank in dishwasher.
by emptying any remaining powder (powder can be saved for refill) and cleaned with mild
detergent and soft cloth or sponge.
Parts are completely dry before reassembly and refilling the Powder Container with powder.
Never place Powder Container in dishwasher.
ALWAYS FOLLOW INSTRUCTIONS AND NOTE EXPIRY DATE ON POWDER MANUFACTURER LABEL
7
Cleaning
3
Wash and rinse Funnel &
Remove Funnel Cover
Funnel Cover thoroughly.
from Funnel by lifting
Funnel and Funnel Cover are
up on Funnel Cover.
top rack dishwasher safe and are
also safe for steam sterilization.
With the Funnel removed and Powder Container
attached to machine, wipe any dry formula powder
from the underside of the Powder Container & Funnel
Compartment in a circular motion with a DRY paper
towel or DRY soft cloth.
Never use a wet or damp cloth to clean the Funnel
Compartment or underside of Powder Container.
Always make sure the Funnel and Funnel Cover
are completely DRY before placing in machine.
Make sure Powder Container and all Powder Container
User Tips
Do not remove the Water Tank from the base to refill.
Simply lift the Water Tank Lid at the front and pour water in.
Make sure to keep water above "MIN" line.
Refill Water Tank regularly with room temperature water
and keep machine powered on. This way, the water will always
be warm and ready to serve.
Always make sure powder level is above the top of the
Stirring Wheel. You will know it's time to refill the Powder
Container when any of the four horizontal arms of the
Stirring Wheel are visible through the powder. Do not use
the machine when the powder level is below the MIN line
marked on the Powder Container.
When setting up the Powder Container Parts, always make
sure the Measuring Wheel and Locking Cover are set up with
the arrows aligned as shown in the illustration at right.
If the Measuring Wheel rotates when installing the Locking
Cover, rotate the Measuring Wheel to the position shown
at right.
If the powder forms a cone shape mound
when refilling the Powder Container,
use the 3 arms on the bottom of the
Powder Container Lid to gently level
the powder.
Adjust the Drip Tray so the bottle is as close to the
funnel outlet as possible. This will make sure no
formula spills on the outside of the bottle.
The Formula Pro can be used at any time during the water heating cycle, but not all powders
mix well with cool or room temperature water. Always check for clumps & shake or stir the
closed bottle gently to mix the powder completely with the water.
Refill when arms of
stirring wheel are
visible
Top
View
8
Advertisement
