Advertisement
+
-
4.7.
Activating Components in the Vehicle. See fig.6.
4.7.1.
To activate components with positive (+) voltage, contact the probe tip to
the positive terminal of the component. The green negative sign "-" LED
should light, indicating continuity to earth.
4.7.2.
While observing the green "-" LED, quickly depress and release the power switch forward (+).
If the green indicator has gone out and the red positive sign (+) LED has come on, you may proceed with further activation.
WARNING: Haphazardly applying voltage to certain circuits can cause damage to a vehicle's electronic components. Therefore, it
4.7.3.
is strongly advised to use the vehicle manufacturer's schematic and diagnosing procedure while testing.
4.8.
Activating Electrical Components with Earth. See fig.7.
4.8.1.
Contact the probe tip to the negative terminal of the component, the LED indicator should light RED.
4.8.2.
While observing the red (+) LED, quickly depress and release the power switch rearward (-). If the red indicator went out and the
green negative LED (-) came on you may proceed with further activation.
WARNING: With this function, if you are contacting a protected circuit, a vehicle's fuse can be blown or tripped if you apply earth to it.
4.9.
Jumper lead feature. See Fig.6.
4.9.1.
The black clamp and the auxiliary earth lead are connected through the unit. By leaving the red clip disconnected from the vehicles battery, the
unit can be used as a long jumper lead.
4.9.2.
Be careful to avoid short circuits and overloading when using this jumper function.
4.10.
Checking for Bad Earth.
4.10.1.
Probe the suspected earth wire or contact with the probe.
4.10.2.
Observe the green negative (-) LED. Depress the power switch forward then release.
4.10.3.
If the green negative sign (-) LED went out and the red positive sign (+) came on, this is not a true earth.
fig.6
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Press
(+)
to
illuminate
bulb.
fig.4
01284 703534
Original Language Version
fig.7
sales@sealey.co.uk
fig.5
+
Press
(-) to
-
earth
horn.
www.sealey.co.uk
PP7
Issue:4 (4) 17/09/18
Advertisement
