Siemens SITRANS T Series Operating Instructions Manual page 34

Technical specifications
8.1 SITRANS TO500
Construction
Weight
Dimensions
Mounting rail adapter
Material
Displays and buttons
LEDs
Button
PROFIBUS DP communication
The address can be set using
Cyclic user data
•
•
Acyclic user data
•
The acyclic services are only tested and available in Siemens automation systems.
In H-systems
34
Output bytes
Communication modes
4 slots
2.4 kg (5.3 lb)
250 x 140 x 110 mm
On rear side
Aluminum
"Power-on" (continuous light)
•
"Status" (flashing during startup; otherwise
•
continuous light)
"Reset" (system restart or address reset)
parameter assignment software (not with
•
PDM)
(default setting address 126)
240 bytes
5 bytes per measured value, a total of
48 measured values
5 bytes = 4 bytes measured value, 1 byte status
7 modes can be set via the GSD
Mode 1 = 48 measured values from channel 1
Mode 2 = 48 measured values from channel 2
Mode 3 = 48 measured values from channel 3
Mode 4 = 48 measured values from channel 4
Mode 5 = 24 measured values each from chan-
nel 1 and 2
Mode 6 = 16 measured values each from chan-
nel 1, 2 and 3
Mode 7 = 12 measured values each from chan-
nel 1, 2, 3 and 4
240 bytes per slot
Each slot represents a channel. 240 bytes with
48 measured values in each slot.
Cyclic data exchange only
Operating Instructions, 04/2017, A5E39322264-AC
SITRANS TO500