Mounting The Device - Siemens SITRANS T Series Operating Instructions Manual

Mounting and connecting

4.2 Mounting the device

See also
Technical specifications (Page 33)
Note
Material compatibility
Siemens can provide you with support concerning selection of sensor components wetted by
process media. However, you are responsible for the selection of components. Siemens
accepts no liability for faults or failures resulting from incompatible materials.
4.2 Mounting the device
Procedure
1. Mount the device on the mounting rail in the control cabinet with the help of the
supporting plate.
2. Install the device only horizontally with the ventilation slots facing up.
3. Do not cover the ventilation slots of the device.
4. Please note the bending radiuses of the measurement lance and the information in the
sections Introduction (Page 15) and Measurement lance (typical) (Page 35).
16
Operating Instructions, 04/2017, A5E39322264-AC
SITRANS TO500