Related Manuals for AnthroDesk MDESK-TMP-L1
Summary of Contents for AnthroDesk MDESK-TMP-L1
-
Page 2: Parameter Instruction
Parameter instruction Electric Control Part: Input Voltage:100-240V can be use Output Voltage:18V DC Duty cycle:10%MAX 2min on 18 min off Switch power supply,low energy consumption Manual device can move and long press Desk frame part: built-in limit switch Dynamic load:120KG The maximum static load:140KG Load speed:30mm/s Lift range:640mm---1290mm... - Page 3 Desk frame installation instructions Part lists Link block1 2pcs Link block2 2pcs Long Tube 4pcs Horizontal tube-390 1pcs Horizontal tube-600 2pcs Desk base-680 2pcs legs 3pcs Desk base-400 1pcs glides 6pcs Control box 1pcs Handset 1pcs Power connecting 1pcs Handset wire 1pcs Motor wires 3pcs M8*10 16pcs M8*25 8pcs...
- Page 4 OPERATION INSTRUCTIONS 1.Link block instructions Leg 1pcs M8*10 4pcs M6*14 6pcs Link block1 2pcs Link block2 2pcs 2.Long tube instructions Loose the four screws and adjust to the suited length，then screw it on tightly The rotation angle between two brackets can be M8*10 12pcs adjusted from 90°...
- Page 5 OPERATION INSTRUCTIONS 3.Desk base instructions Desk base-400 2pcs glides 6pcs M8*25 12pcs Desk base-680 2pcs 4.Control box instructions Motor wires 3pcs Power connecting 1pcs Handset wire 1pcs M6*14 4pcs Control box 1pcs...
- Page 6 OPERATION INSTRUCTIONS 5.Horizintal tube instructions Horizontal tube-390 1pcs M8*10 6pcs Horizontal tube-600 2pcs Horizontal tube-600 2pcs 6.Handset instructions Handset 1pcs ST3.5*16 2pcs...
- Page 7 Handset Usage Instruction the height will go to 720mm Touch the key and release it the second memory position,pressand hold the key in 5 seconds for memory this positon the first memory position,pressand hold the key in 5 seconds for memory this positon display screen display height 640-1290mm Touch and hold the keys down when arrived your positon pls release it...
Need help?
Do you have a question about the MDESK-TMP-L1 and is the answer not in the manual?
Questions and answers