Lexus RX450h Owner's Manual page 140

140
3-3. Adjusting the seats
When entering/exiting the vehicle
■
Pull the seatback angle adjustment
lever or to tilt the seatback for-
A B
ward and then slide the seat forward.
Make sure that the second-row seat is free
of passengers and obstructions before
operating the seatback tilt lever.
After passengers have
■
entered/exited the vehicle
Tilt back and slide the second-row seat
until it locks in position.
Remove the secured seat belts from the
seat belt hangers.
NOTICE
■ When moving the second-row seat
for third-row seat access
Do not slide the second-row seat for-
ward if an electronic device is connected
to the USB charging port on the rear
console. Otherwise, the second-row
seat may contact the electronic device,
possibly resulting in damage to the
device.
Folding the third-row seat seat-
backs (RX450hL)
Before folding the third-row seat
■
seatbacks
1
To prevent the seat belt from being
damaged, hook it to the seat belt
hanger.
2 Lower the third-row seat head
restraints to the lowest position.
(P.145)
Folding the third-row seat seat-
■
backs
Press and hold the side of the
switch until the seatback is folded com-
pletely.
A buzzer will sound twice before the oper-
ation begins and twice when the operation
is complete.
If the switch is released while the seatback
is operating, the seatback will stop and a
buzzer will sound continuously.