Yamaha Revolabs Executive Elite 01-ELITEEXEC8 Room Control Api Manual page 8

Property/Action Command Format
create mutegroup create mutegroup <new
group name>
currentipaddress get currentipaddress
currentipdefaultgatew get currentipdefaultgateway
ay
currentipdns get currentipdns
currentipsubnet get currentipsubnet
delete mutegroup delete mutegroup <group
name>
deviceid get deviceid ch <channel
number>
echo set echo <0/1>
enableonlineaccess get enableonlineaccess
enableonlineaccess set enableonlineaccess <0/1>
eq get eq ch <channel number>
eq set eq ch <channel number>
<eq1> <eq2> <eq3> <eq4>
groupbyindex get groupbyindex <index
number>
groupcount get groupcount
groupmutetype get groupmutetype <group
name>
groupmutetype set groupmutetype <group
name> <0/1/2>
groupstandbymode get groupstandbymode
<groupname>
groupstandbymode set groupstandbymode
<groupname> <0/1/2>
hipassfilter get hipassfilter ch <chanel
number>
hipassfilter set hipassfilter ch <channel
number>
<0/110/140/175/220>
ipdhcp get ipdhcp
ipntp get ipntp
language get language
language set language <EN/FR/GE>
legacymode get legacymode
legacymode set legacymode <0/1>
logmask get logmask
Description
23 - Costa Rica, 24 - Venezuela,
25 - Middle East
Create a new mute group.
Retrieve current IP address.
Retrieve current default gateway address.
Retrieve current IP DNS address.
Retrieve current IP subnet.
Delete an existing group.
Retrieve microhone's dect id.
Echo the entered command.
0 - off, 1 - on.
Retrieve online access enable/disabled state,
0 - disable, 1 - enable.
Configure enable/disable online access.
0 - disable, 1 - enable.
Retrieve the four EQ values associated with the
given channel.
Configure the four EQ values associated with the
given channel,
EQ range -10 to 10 db.
Retrieve the group name by index
Retrieve the group count.
Retrieve group mute type,
0 - Individual mute, 1 - Tabletop mute,
2 - Push to talk.
Configure group mute type,
0 - Individual mute, 1 - Tabletop mute,
2 - Push to talk.
Retrieve group's standby mode state.
Set group standby mode,
1 - Enter standby, 0 - leave standby, 2 - toggle.
Retrieve the high pass filter value configured for
given channel.
Configure the high pass filter value for a given
channel.
Retrieve the DHCP enable/disable state.
0 - disabled, 1 - enabled.
Retrieve the currently configured NTP servers.
Retrieve the language code.
EN - English, FR - French, GE – German
Configure the language code.
EN - English, FR - French, GE – German
Retrieve the legacy mode setting value.
0 – Legacy mode off, 1 - Legacy mode on
Configure the legacy mode.
0 – Legacy mode off, 1 - Legacy mode on
Retrieve the debug log level, minimum severity,
0 - debug, 1 - warning, 2 - error, 3 - off.
Response
create mutegroup <new
group name>
val currentipaddress <ip
address>
val currentipdefaultgateway
<ip gateway>
val currentipdns <ip dns>
val currentipsubnet <ip
subnet>
delete mutegroup <group
name>
val deviceid ch <channel
number> <dect id>
<no response>
val enableonlineaccess <0/1>
val enableonlineaccess <0/1>
get eq ch <channel number>
<eq1> <eq2> <eq3> <eq4>
val eq ch <channel number>
<eq1> <eq2> <eq3> <eq4>
val groupbyindex <channel
number> <group name>
val groupcount <group
count>
val groupmutetype <group
name> <0/1/2>
val groupmutetype <group
name> <0/1/2>
val groupstandbymode
<groupname> <0/1>
val groupstandbymode
default 1
val hipassfilter ch <chanel
number>
<0/110/140/175/220>
val hipassfilter ch <chanel
number>
<0/110/140/175/220>
val ipdhcp <0/1>
get ipntp <server1>
<server2> ...
val language <language
code>
val language <language
code>
val legacymode <0/1>
val legacymode <0/1>
val logmask <0/1/2/3>
8