Whirlpool W7OM44S1H Daily Reference Manual page 5

END TIME START DELAY
In many functions, once you have set a cooking time
you can delay starting the function by programming its
end time. The display shows the end time while the
icon flashes.
END TIME
Press or to set the time you want cooking to end,
then press to confirm and activate the function. Place
the food in the oven and close the door: The function
will start automatically after the period of time that has
been calculated in order for cooking to finish at the
time you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase: The oven will reach the
temperature your require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table. During the waiting time, you can press
amend the programmed end time or press
other settings. By pressing
information, it is possible to switch between end time and
duration.
. 6 SENSE
th
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or bake
all the dishes available.
When required, simply indicate the characteristic of
food to obtain an optimal result.
WEIGHT / HEIGHT ROUND TRAY LAYERS
KILOGRAMS
To set the function correctly, follow the indications on
the display, when prompted, and press
the required value then press
DONENESS / BROWNING
In some 6 Sense functions it is possible to adjust the
th
doneness level.
DONENESS
When prompted, press
level between rare (-1) and well done (+1). Press
to confirm and start the function.
In the same way, where allowed, in some 6
functions, it's possible to adjust the browning level
between low (-1) and high (+1).
3. START THE FUNCTION
At any time, if the default values are those desired or
once you have applied the settings you require, press
to activate the function.
During the delay phase, by pressing
ask if you want to skip this phase, starting immediately
or to
to change
, in order to visualize
or to set
to confirm.
or to select the desired
Sense
th
the oven will
the function.
Please note: Once a function has been selected, the display
will recommend the most suitable level for each function.
At any time you can stop the function that has been activated
by pressing .
If the oven is hot and the function requires a specific
maximum temperature, a message will shown on the
display. Press
a different function or wait for a complete cooling.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
PREHEATING
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature, requiring to "ADD FOOD".
At this point, open the door, place the food in the
oven, close the door and start cooking.
Please note: Placing the food in the oven before preheating
has nished may have an adverse e ect on the nal cooking
result. Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the
oven to reach using
5. PAUSE COOKING / TURN OR CHECK FOOD
By opening the door, the cooking will be temporarily
paused through deactivating heating elements.
To resume the cooking, close the door.
Some 6 Sense functions will require the food to be
th
turned during cooking.
TURN FOOD
An audible signal will sound and the display shows the
action to be done. Open the door, do the action
prompted by the display and close the door
In the same way, at 10% of time before the end of
cooking, the oven prompts you to check the food.
or
CHECK ON FOOD
An audible signal will sound and the display shows the
action to be done. Check the food, close the door and
press or to continue cooking.
Please note: Press
action is done after a certain time the oven will continue the
cooking.
to return to previous screen and select
or .
to skip these actions. Otherwise, if no
EN
5