Signature Hardware Semi-Recessed Sink Installation Instructions

BEFORE INSTALLING

Read entire Semi-Recessed Sink Installation
Instructions. Observe all local building and
safety codes.
INSTRUCTIONS
Unpack and inspect the product for any shipping
damages. If you find damages, do not install. Contact
Customer Service at 1-866-855-2284. If you need
assistance or have questions while installing your sink,
contact Customer Service.
For this installation it is assumed that the vanity top has
been cut to the dimensions of the sink. We recom-
mend consulting a professional if you are unfamiliar
with this type of installation, Signature Hardware
accepts no liability for any damages to the floor, walls,
plumbing or for personal injury during installation.

TOOLS AND MATERIALS:

Silicone Damp Cloth
Sealant
SEMI-RECESSED SINK
Thread Basin Wrench
Sealant

INSTALLATION

1. Carefully turn the sink over to rest upside down on the vanity top.
2. Apply a continuous bead of silicone to the outer edge of the
sink where it will contact the vanity top.
3. Turn the sink back over, placing it inside the sink cutout and
position until centered.
4. Remove any excess silicone with a cloth moistened with water or
mineral spirits. Let silicone dry for 24 hours. If a lavatory drain is
included, move on to the Drain Installation section.
24 hr
Semi-Recessed Sink Installation Instructions
1