Table of Contents
Advertisement
30
5.Basic Operation
5.Basic Operation
( 5-1 Turning On the Transceiver
)
1.The power turns on when the (!) key is pressed and held
approximately one second.
Use the same operation to turn the power off.
*The(!) key is designed hard enough to press on purposes so it doesn't turn
off while in use.
( 5-2 Selecting Frequencies
•To select a Main Band frequency
Rotate the upper main dial.
•To select a frequency on the Sub Band
Rotate the upper sub dial.
)
Frequencies increase when rotated clockwise and decrease when rotated
counterclockwise.
( 5-3 Adjusting the Audio Output (Volume)
)
There are 21 audio output levels (from 0 to 20)
The default setting is level 10.
Volume level
•Adjusting the Main Band Volume
Rotate the lower main dial.
•Adjusting the Sub Band Volume
Rotate the lower sub dial.
The audio increases when the dial is rotated
clockwise and decreases when rotated
counterclockwise.
ii1
ll I
(ii]
VFO
2 2 3 . 5 0 0 _,
o
Vfi'O
915. 00 0
;: M
_,.
"'
0
·Be careful when using earphones. Confirm the volume level
at a low and then increase it gradually.
CAUTION
Advertisement
Table of Contents
