Technical Data; Cordless Impact Wrench; Definitions: Safety Guidelines - DeWalt DCF894 Instructions Manual

EnGLIsH
18V CORDLESS IMPACT WRENCH
DCF894, DCF894H
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No load speed
1st speed
2nd speed
3rd speed
Impact rate
Max. torque
Tool holder
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841-2-2.
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents impact tightening of fasteners of the
maximum capapcity of the tool. However if the tool is
used for different applications, with different accessories
or poorly maintained, the vibration and/or noise emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
24
WALT one of the
e
DCF894 DCF894H
V 18 18
DC
1 1
Li-Ion Li-Ion
min -1 0–900 0–900
0–2000 0–2000
0–2000 0–2000
min -1 0–3100 0–3100
Nm 447 447
1/2" 1/2"
(13 mm) (13 mm)
kg 1.5 1.5
dB(A) 94 94
dB(A) 105 105
dB(A) 3 3
m/s 2 13.5 13.5
m/s 2 4.4 4.4
hands warm (relevant for vibration), organisation of
work patterns.
EC-Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
DCF894, DCF894H
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2014, EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
16.08.2019
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
WALT at
e
WALT.
e