Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt DCF894HB
Summary of Contents for DeWalt DCF894HB
- Page 1 Instruction Manual DCF894, DCF894H 20V Max* Mid-Range Impact Wrench...
- Page 2 Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
-
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce WARNING! Read all safety warnings and all personal injuries. instructions. Failure to follow the warnings and c ) Prevent unintentional starting. Ensure the instructions may result in electric shock, fire and/or switch is in the off position before connecting to serious injury. -
Page 4: Additional Specific Safety Rules
operations different from those intended could result WARNING: Some dust created by power sanding, in a hazardous situation. sawing, grinding, drilling, and other construction activities contains chemicals known to the State 5) Battery Tool Use and Care of California to cause cancer, birth defects or a ) Recharge only with the charger specified by the other reproductive harm. -
Page 5: Batteries And Chargers
English • Contents of opened battery cells may cause ..... visible radiation ..... wear hearing respiratory irritation. Provide fresh air. If symptoms protection ..... wear respiratory persist, seek medical attention. protection ..... read all WARNING: Burn hazard. Battery liquid may be documentation ..... - Page 6 without the cap or in a tool, the pack will be considered one protect our environment and conserve natural resources by battery at the Watt hour rating indicated next to “Use”. returning the spent nickel cadmium, nickel metal hydride or lithium-ion batteries to an authorized D WALT service Example of Use and Shipping Label Marking center or to your local retailer for recycling.
- Page 7 battery pack in the cavity. Unplug the charger before Minimum gauge for Cord sets attempting to clean. Total length of Cord in Feet Volts Wireless Certifications and (meters) 120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7) Safety Information 240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4) •...
-
Page 8: Charger Operation
• The connectivity range is up to 100 feet (30.5 meters) The compatible charger(s) will not charge a faulty battery depending on environment and location. pack. The charger will indicate faulty battery pack by refusing to light or by displaying a problem pack or charger •... -
Page 9: Storage Recommendations
Intended Use the battery pack in an air temperature below +40 °F (+4.5 °C), or above +104 °F (+40 °C). This is important This impact wrench is designed for professional impact and will prevent serious damage to the battery pack. fastening and drilling applications. The impact function 2. -
Page 10: Assembly And Adjustments
Anvils (Fig. E, F) Fig. D WARNING: Use only impact accessories. Non-impact accessories may break and cause a hazardous condition. Inspect accessories prior to use to ensure that it con tains no cracks. CAUTION: Inspect anvils, detent pins and hog rings prior to use. -
Page 11: Operation
OPERATION Ft.-lbs. WARNING: To reduce the risk of serious personal Low/High/ Low/High/ Cat # injury, turn unit off and remove the battery pack Precision Wrench™ Precision Wrench™ before making any adjustments or removing/ DCF894, DCF894H 0–150/0–330/0–330 200/447/447 installing attachments or accessories. An CAUTION: Ensure fastener and/or system will accidental start-up can cause injury. -
Page 12: Maintenance
MAINTENANCE WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. Cleaning WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week.