DeWalt DW060 Instructions Manual page 35

Denotes risk of electric shock.
Denotes risk of fire.
Safety instructions for lasers
• This laser complies with class 2 according to EN 60825-1:2007. Do not
replace a laser diode with a different type. If damaged, have the laser
repaired by an authorised repair agent.
• Do not use the laser for any purpose other than projecting laser lines.
An exposure of the eye to the beam of a class 2 laser is considered safe
for a maximum of 0.25 seconds. Eyelid refl exes will normally provide
adequate protection. At distances over 1 m, the laser complies with
class 1 and thus is considered completely safe.
• Never look into the laser beam directly and intentionally.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the laser beam can cross any
person at head height.
• Do not let children come into contact with the laser.
Additional safety instructions for batteries
• Do not attempt to recharge batteries.
• Do not open or mutilate batteries for any reason.
• Do not expose batteries to water.
• Do not expose batteries to fi re.
• Do not store batteries in locations where the temperature may exceed
40 °C.
• Use only the correct size of batteries. When replacing, do not mix old
batteries with new ones.
• Under extreme conditions, battery leakage may occur. When you notice
liquid leaking out, proceed as follows:
– Carefully wipe the liquid off using a cloth. Avoid skin or eye contact.
Do not swallow.
E N G L I S H
33