Installing The Oil Filter; Replacing The Air Filter - TAMROTOR Tempest E3 Operating Instructions Manual

3.4.2 Installing the oil filter

1. Lubricate the oil filter sealing ring with clean oil.
2. Install the filter by tightening it up clockwise by hand.

3.5 Replacing the air filter

The air filter cannot be cleaned or reused.
Remove the filter with caution. Make sure that particles do not get into the inlet air channel.
Use only original Gardner Denver spare parts. The use of other spare parts may cause compressor damage.
1. See "Before maintenance" sivulla 5 for precautions.
2. Remove the air filter cover (3) and the old filter (2).
3. Clean the air filter housing (1).
4. Install the new air filter (2) and its cover (3) back to their places.
8
Replacing the oil filter
3. Maintenance instructions
23000385