•
Push
in
the
into
the
recesses
,
).
2
4.2.5 Mounting the hinged lid
If necessary, the hinged lid can be inserted turned through 180° during moun-
ting. The cable routing clip must then also be turned.
•
Insert the hinged lid in the short link (see Fig.
•
Swivel the hinged lid into the long link
•
If necessary, pull out the cable routing clip
5
Disposal
– Residual metal: As scrap metal
– Plastic: As household waste
– Packaging: As household waste
Comply with the local waste disposal regulations.
GES9-3 plastic service unit
BA10
spacers
on
both
to
stabilise
the
sides
(see
Fig.
,
).
1
.
3
and push it to the other side.
2
Disposal
pressure
plate
,
und
2
EN | 21