AEG S73401CNS1 User Manual page 34

34 www.aeg.com
A
B
C
1
2
• Remove using a tool the cover (A). Un-
screw the lower hinge pivot (B) and
the spacer (C) and place them on the
opposite side.
• Re-insert the cover (1) on the opposite
side.
• Remove the plugs on the upper side
of both doors and move them to the
other side
• Re-insert the lower door on the lower
hinge pivot .
• Insert the middle hinge into the left
drill of the lower door.
• Unscrew the upper hinge pivot and
place it on the opposite side.
• Fit the upper door on the upper door
pivot.
• Re-insert the upper door on the mid-
1
dle hinge pivot slightly tilting both
doors.
• Re-screw the middle hinge . Do not
forget the plastic spacer .