PhysioRoom.com IS-820 User Manual page 4

(3)
!
Box Spanner
1. Assemble the saddle (H-1) with horizontal slider (as the small drawing 2)
2. Insert the seat post (H) in the main frame, choose the situation position
and tighten the locking knob aside the cover. Ensure the knob is always
tightened.
6
STEP.3 STEP.4
!
(4)
Allen Key
1. Loose the pre-assembly screws & washer (C-2, C-3) on the front tube holder.
2. Connect the computer cable upper & lower (C-4& E-1)
with 4 hexagon screws and washers. (C-2, C-3)
!
7