Part List; Safety Caution - PhysioRoom.com IS-820 User Manual

Let's start a fearless adventure in knowing
what to do when no one's there telling you what to do.
BUT
Before that please read the following

Safety Caution

• This exerciser is made for home use or semi commercial use only, and tested up to a max
body weight of 150kg.
• Follow the steps of the assembly instructions carefully.
• Use only original parts as delivered.
• Place this exerciser on an even, non-slippery surface. Because of possible corrosion, the us-
age of any exerciser in moist areas is not recommended.
• Before assemble it, check if delivery is complete by using the included parts-list.
• For assembly use only suitable tools and ask for assistance with assembly if necessary.
• Check before the training and every 1-2 month that all connecting elements are tight
and are in the correct condition
• Replace defective components immediately and/or keep it out of use until repair.
• For repairs, use only original spare parts.
• In case of repair please ask your dealer for advice.
• Ensure that training starts only after correct assembly and inspection.
• For all adjustable parts be aware of the maximum positions to which they can be adjusted/
tightened to.
• This exerciser is designed for adults. Please ensure that children use the exerciser only
under the supervision of an adult.
• Ensure that those present are aware of possible hazards, e. g. movable parts during training.
• Warning:incorrect/excessive training can cause health injuries.
• Please follow the advice for correct training as detailed in training instructions.
• Consult your physician before starting with any exercise program. They can advice on the
kind of training and which impact is suitable.
• This user manual is only for customers' reference.
• The supplier can not guarantee for mistakes occurring due to translation or change in tech-
nical of the product.
• All data displayed are approximate guidance and cannot be used in any medical application.
2
Preface

PART LIST

NO. DESCRIPTION QTY
A CONSOLE 1 PCS
A-1 SCREW M5X10L 4 PCS
B HANDLEBAR SET 1 SET
B-1 2 PCS
HAND-PULSE
B-2 2 PCS
FORAM GRIP
B-3 CAP 2 PCS
B-4 CONNECTIN WIRE 1 PCS
C HANDLEBAR POST 1 PCS
C-1 HANDLEBAR POST COVER 1 PCS
C-2 CURVED WASHERφ8xφ19x2t 4 PCS
C-3 SCREW M8xP1.25x16L 4 PCS
C-4 CABLE 1 PCS
D FRONT STABILIZER SET 1 SET
D-1 FRONT CAP(LEFT) 1 PCS
D-2 SCREW M8xP1.25x40L 2 PCS
D-3 TRANSPORTATION WHEELφ57xφ8x20 2 PCS
D-4 NYLON NUT M8 2 PCS
D-5 FLAT WASHERφ8*φ19*2T 2 PCS
D-6 FRONT CAP(RIGHT) 1 PCS
D-7 FLAT WASHER φ6xφ12x1t 1 PCS
D-8 SPRING φ16xφ2.0x35T 1 PCS
E MAINFRAME 1 SET
E-1 CABLE 1 PCS
E-2 SEAT POST BUSHING 1 PCS
E-3 DRIVING BELT 1 PCS
E-4 CHAINCOVER ( R+L ) 1 SET
E-5 SEAT POST KNOB 1 PCS
E-6 SCREW M4x50L 6 PCS
E-7 CRANK ARM ( R+L ) 1 SET
E-8 CAP FOR CRANK ARM 2 PCS
E-9 NYLONO NUT M8 2 PCS
E-10 SCREW 6 PCS
E-15 SENSOR HOLDER 1 PCS
E-16 SENSOR 1 PCS
E-17 SCREW 1 PCS
E-18 DC WIRE 1 PCS
F PEDAL ( R+L) 1 SET
G REAR STABILIZER 1 SET M-10 STAR WASHER
G-1 SCREW 8 PCS M-11 BUSHING
G-2 REAR CAP( LEFT) 1 PCS M-12 BEARING 6003RS
G-3 ADJUST CAP 2 PCS M-13 BUSHING
G-4 REAR CAP ( RIGHT) 1 PCS
H HORIZONTAL SEAT POST SET 1 SET
H-1 SADDLE 1 PCS
H-2 SEAT SLIDER 1 PCS
H-3 CAP 1 PCS
H-4 SOCKET 1 PCS
H-5 FLAT WASHER φ14.3xφ25x2.0t 1 PCS
NO. DESCRIPTION QTY
H-6 SEAT SLIDER KNOB 1
H-7 SEAT POST COVER 1
H-8 SCREW M5xP0.8x6L 2
H-9 SCREW M4x15L 1
I-1 SCREW M8xP1.25x20L 8
I-2 FLAT WASHERφ8*φ19*2T 8
I-3 COVER 1
I-4 SPRING WASHER φ7x2t 1
I-5 FLAT WASHER φ7xφ12x1t 1
I-6 BUSHING φ7xφ12x25mmL 1
I-7 T-TYPR KNOB M7xP1.0x55L 1
I AXLE 1
J-1 HEXAGAONAL SCREW M8xP1.25x12Lx5t 3
J-2 DRIVING PULLEY 1
J-3 BUSHING φ22xφ17x7.5mmL 1
J-4 BEARING 6203RS 2
J-5 FLAT WASHERφ17.5xφ25x0.3t 3
J-6 CURVED WASHER φ17.5xφ25x0.3t 1
J-7 C-TYPR RING 1
K ADAPTOR 1
L SHAFT 1
L-1 SPRING 1
L-2 FLAT WASHERφ8.5xφ25x1t 1
L-3 HEXAGON SCREW M8xP1.25x20L 1
L-4 IDLE WHEEL φ24xφ37x20.5mm 1
L-5 NYLON NUT M8 1
L-6 FLAT WASHER φ6xφ12x1t 1
L-7 HEXAGAON SCREW M6xP1.0x12L 1
M-1 FLYWHEEL 1
M-2 BEARING 6300RS 1
M-3 ONE WAY BEARING 1
M-4 6203 RS 1
M-5 AXLE SHAFT 1
M-6 FLAT WASHERφ30xφ34x1t 1
M-7 SMALL PULLEY 1
M-8 BEARING 6000RS 1
M-9 NUT 6
2
1
1
1
N GEAR BOX 1
N-1 SHAFT FOR GEAR BOX 1
N-2 MAGNET SET 1
N-3 SPRING WASHER 2
N-4 FLAT WASHER 2
N-5 SCREW 2
N-6 SCREW 1
N-7 NUT 1
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
SET
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
3