Optional Accessories - Makita XVR01 Instruction Manual

Removing jammed rivet
If the rivet is jammed inside the tool, remove it using a
tool such as pin. If it is difficult to remove the jammed
rivet, replace the jaw pusher or pipe with a new one.
For replacement procedure, refer to the instruction for
installing or removing the head assembly.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Nose piece
• Jaw pusher
• Jaw
• Pipe
• Grease
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
11 ENGLISH