Regarding 5 Digital Times Choosing - Codyson CD-4820 User Manual

REGARDING 5 DIGITAL TIME CHOOSING
6
It will automatically display 180S when power at the first time,
It is the most common cleaning time. Pressing ON, it begins
cleaning. The time displayed is the time left. When the time
000
" " is displayed, the unit will automatically stop.
Pressing SET, there is a new time displayed, every time press
SET, it will change to the next time display. It usually use for
the first time cleaning of the product, the dirt staying on the
product is long, so it needs more time to clean.
It usually use for the first time cleaning of several products
together. Choosing this for shorten the cleaning process.
It usually use for cleaning the greasy valve, greasy gear,
greasy bearing and such as these metal parts, when choosing
this time, using the heater together. This function can soften
the oils to increase the cleaning result.
Long time cleaning may cause the original unfirm screw
on the product, the original unfirm inlaid product become
loosen.
There still has dirt likes smoke come out when it closes to
finish the 180s cleaning. Using this step.
This step is usually taken after finishing the above steps, but
the water in tank is dirty, replacing with clean water and then
cleaning another 90s to keep clean of the product's surface.