Table of Contents
Advertisement
Hedge Trimmer
1. Introducing the hedgetrimmer
Technical data
Operating Voltage
Nominal Frequency
Nominal Consumption
Cutting movements
Shear length
Cutting Thickness
Weight (without fl ex)
* The nominal consumption you will fi nd on the type plate
Noise Pressure Level LpA according to EN 50144
Vibration according to EN 50144
Class of protection: II / DIN EN 50144/VDE 0740
Interference suppressed in accordance with EN 55014, EN 61000-3-2:95, EN 61000-3-3:95 .
We reserve the right to make changes to the technical specifi cations.
The devices are manufactured in accordance with the provisions of DIN-EN 50144-1and DIN-EN 50144-2-15 and fully
comply with the provisions of the German Equipment and Product Safety Act.
2. General safety instructions
Information on noise emission in accordance with
"Machine Noise Information Ordinance 3. GPSGV and
Machinery Directives: the noise pressure level at the
place of work can exceed 85 dB(A). In such cases the
operator will require noise protection (e.g. wearing of
ear protectors).
Attention: Noise protection ! Please observe the local
regulations when operating your device.
General safety instruction
Usage of hedge trimmer always involves a risk
of accidents, therefore please observe the relevant
accident prevention instructions.
The machine has been constructed according to the
latest technology and in accordance with the recog-
nised technical safety regulations. Nevertheless, use
of the machine can involve risks to the user or third
persons, and can cause damage to the machine or
other objects.
Attention: Using electric power tools, you must observe
following fundamental safety instructions to protect
yourself against electric shock, against danger of
injuries and danger of fi re. Read all these instructions
before using the hedge trimmer and observe them.
Keep these safety instructions at a safe place.
Use the machine in a safety conscious manner for
suitable applications in a technically perfect condition
only and with due regard to the operating instructions!
Immediately rectify or have rectifi ed any faults which
could adversely affect safety!
This machine may cause serious injuries. Please
read the instruction manual carefully as to the correct
handling, the preparations, the maintenance and the
proper use of the hedgetrimmer. Familiarize your-self
with the machine before the fi rst use and also have
EHT 600PRO / XH 600E-PRO (EHT 600)
V~
230
Hz
50
W
600
min
2400
-1
mm
600
mm
29
kg
3,6
86 dB (A)
< 2,5 m/s
2
yourself introduced to practical use of the machine.
3. Application
The machine is only intended for trimming hedges. Use
for any other purpose constitutes inappropriate use. The
manufacturer / supplier is not liable for any injury and/
or damage arising from inappropriate use. This risk
is the sole responsibility of the user.Appropriate use of
the machine also includes adherence to the operating
instructions and compliance with the servicing and
maintenance instructions.
Always keep the instruction manual close at hand
during operation!
4. Safety instruction
1. Keep your working area tidy. Disorder at your
working area may lead to accidents.
2. Please consider environmental infl uences. Do not
expose power tools to rain. Do not use power
tools in wet or moist surroundings. Ensure that
there is good lighting. Do not use power tools
near infl ammable fl uids or gases.
3. Keep children away. Do not allow other persons
to touch the power tool or cable. Keep other per-
sons out of your working area.
4. Keep your power tools in a safe place. Power tools
that are currently not in use should be stored in a
dry place where they are out of reach of children
(high on a shelf or in a locked place).
5. Do not overtax your power tools. They work better and
safer if used within the stated performance range.
6. Always disconnect the plug from the mains socket
before carrying out any work on the equipment,
before cleaning and before moving the equipment.
7. The use of hedge trimmers involves certain risks.
GB-1
ENGLISH
Advertisement
Table of Contents
