Launch Dell Expresssign-In/Systray Icon - Dell Latitude 7400 2-in-1 Setup And Specifications Manual

Table 45. External monitor usage state behavior
System state
Yes
No
ExpressSign-in user interface in external monitor usage state
When one or more external monitor(s) are connected to the system and Near or Away state is enabled, the Dell ExpressSign-inwindow is
displayed on the primary monitor, and you can select Yes or No to enable or disable the proximity sensor.
If you select Yes, the proximity sensor is enabled. If you select No, the proximity sensor is not enabled. if you select the Do not show again
checkbox, a message that the user must be within the sensor FoV for the features to function properly is not displayed until the option is
again enabled manually.
NOTE: If multiple monitors are connected, the Dell ExpressSign-in window is displayed only for the first external monitor that is
connected to the system and not for the subsequent monitors.

Launch Dell ExpressSign-in/Systray icon

The Dell ExpressSign-in application supports the auto-run feature only when the application stays in the system tray. Once you exit the Dell
Proximity Sensor application, you have to re-launch the application and enable the feature manually. You can enable the Systray icon to
start the Dell ExpressSign-in window from the system desktop after Dell Proximity Sensor has been launched.
To start the Dell ExpressSign-in , do the following:
1 Click Windows Settings > System > Power & Sleep > Dell Proximity Sensor > Change PC behavior based on your proximity to
the PC to start the Dell ExpressSign-in window.
NOTE: You can start the Dell Proximity Sensor window when the system is ON or in the sleep mode.
2 Click Change PC Behavior based on your proximity to the PC that is displayed at the bottom of the Settings screen.
3 You can also double-click Systray to start the Dell ExpressSign-in window.
4 Right-click Systray to view the context menu.
The options in the context menu are:
Table 46. Context menu options
System state
Near and Away
Enable with external monitor(s)
Open application
Quit
42 System setup
Description
If the system is connected to an external monitor, the proximity
sensor checks whether the user is within the sensor FoV.
This is the default state and the system state remains unchanged
even when the user is outside of sensor FoV.
Options
• Select Away to enable the system lock and turn off the
display when you move away from the system.
• Deselect Near to disable the system lock when you move
away from the system.
• Select Enable with external monitor(s) to enable the
ExpressSign-in.
• Deselect Enable with external monitor(s) to disable the
ExpressSign-in.
Select to start the ExpressSign-in desktop application.
Closes the ExpressSign-in desktop application and deletes the
Systray icon from the system. Restart the ExpressSign-in from