Dell Latitude 3301 Setup And Specifications Manual page 33

Option
C-States Control
Power management
Option Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
•
•
Battery Charge Allows you to select the charging mode for the battery. The options are:
Configuration
•
•
•
•
•
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
Advanced Battery This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge charging algorithm and other techniques, during the non work hours to improve the battery health.
Configuration
Enable Advanced Battery Charge Mode- is disabled
Enable Intel Speed
•
Shift Technology
Default setting: Enabled
USB Wake Support Allows you to enable USB devices to wake the system from Standby.
Disabled
Every Day
Weekdays
Select Days
Enable peak shift—is disabled
Set battery threshold (15% to 100%) - 15 % (enabled by default)
Adaptive—enabled by default
Standard—Fully charges your battery at a standard rate.
ExpressCharge—The battery charges over a shorter time using Dell's fast charging technology.
Primarily AC use
Custom
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
Enable Intel Speed Shift Technology
Description
Allows you to enable or disable the additional processor sleep
states.
• C states
This option is set by default.
System setup 33