Dell Latitude 3301 Setup And Specifications Manual page 30

Security
Table 33. Security
Option
Enable Admin Setup Lockout
Password Bypass
Non-Admin Password Change
Non-Admin Setup Changes
UEFI Capsule Firmware Updates
Computrace(R)
TPM 2.0 Security
Intel SGX
SMM Security Mitigation
30 System setup
Description
OFF(enabled by default)
This option lets you bypass the System (Boot) Password and the internal HDD password prompts
during a system restart.
• Disabled — Always prompt for the system and internal HDD password when they are set. This
option is enabled by default.
• Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE: The system will always prompt for the system and internal HDD passwords when
powered on from the off state (a cold boot). Also, the system will always prompt for
passwords on any module bay HDDs that may be present.
This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by default.
Determines whether changes to the setup option are permitted when an administrator password is
set.
This option controls whether this system allows BIOS updates via UEFI capsule update packages.
This option is selected by default. Disabling this option will block BIOS updates from services such as
Microsoft Windows Update and Linux Vendor Firmware Service (LVFS)
This field lets you Activate or Disable the BIOS module interface of the optional Computrace Service
from Absolute Software. Enables or disables the optional Computrace service designed for asset
management.
• Deactivate Computrace - This option is selected by default.
• Activate Computrace
• Disable Computrace
Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating system.
• TPM On (default)
• PPI Bypass for Enable Commands (default)
• PPI Bypass for Disable Commands
• PPI Bypass for Clear Commands
• Attestation Enable (default)
• Key Storage Enable (default)
• SHA-256 (default)
• TPM Enabled(default)
Software Guard Extensions (SGX) provide a secured environment for running code/storing sensitive
information in the context of the main OS.
Software Control(enabled by default)
Allows you to enable or disable additional UEFI SMM Security Mitigation protections. This option is
not set by default.