Advertisement
VitalQIP AMS 1000
Thank you for choosing the VitalQIP
preloaded with the Appliance Management Software. Upon successful configuration, the AMS
will host the centralized Appliance Management functionality for AMM 500, AMM
5000
1000
, ESM
, and ESM
1000
appliance.
If the box containing the AMS
the Alcatel-Lucent Support center immediately. Refer to "Contacting technical support".
Refer to the table below as you ensure that the contents of the box are accounted for.
Box contents
1000
Your AMS
ships with the following items:
Item
AMS 1000 appliance
Quick Start Guide
Slide Rail Kit - Basic
Slide Rail Kit - tool less
Power cable
Bezel key
Prerequisites
A static IP address should be made available for use by the AMS
Figure 1.
AMS 1000 front view
VitalQIP
Figure 2.
AMS 1000 rear view
VitalQIP
®
1000
®
AMS
appliance. The AMS
5000
appliances. This guide is intended to help you configure the AMS
1000
appliance or the contents themselves are damaged, please contact
1000
appliance comes
1000
, AMM
Quantity
1
1
1
1
1
1
1000
.
1000
Advertisement
Table of Contents
Related Manuals for Alcatel-Lucent VitalQIP AMS 1000
Summary of Contents for Alcatel-Lucent VitalQIP AMS 1000
-
Page 1: Box Contents
® VitalQIP AMS 1000 1000 1000 ® Thank you for choosing the VitalQIP appliance. The AMS appliance comes 1000 preloaded with the Appliance Management Software. Upon successful configuration, the AMS 1000 will host the centralized Appliance Management functionality for AMM 500, AMM... - Page 2 Appliance setup instructions 1. Attach the appliance to an appropriate rack using the supplied rack mount hardware (optional). NIC1 2. Connect a network cable to the Ethernet port labelled on the back of the appliance. 3. Connect a monitor and a keyboard to the appropriate ports on the appliance. These devices can be removed after the initial setup.
- Page 3 changeit 8. Enter the root password: Result: The Network Configuration screen opens. eth0 9. Double-click on the device entry. Result: The Ethernet Device screen opens. Statically set IP addresses Address Subnet mask 10. In the section, enter appropriate values for the Default gateway address fields.
-
Page 4: Contacting Technical Support
12. Close the Network Configuration screen. Do you want to save your changes? Result: A dialog box opens with the message 13. Click Yes to save the changes. Changes are saved. You may want to restart the network Result: A dialog box opens with the message and network services or restart the computer.
Need help?
Do you have a question about the VitalQIP AMS 1000 and is the answer not in the manual?
Questions and answers