Dremel Lite 7760 Operating/Safety Instructions Manual page 22

1600A01A91.qxp_7760 3/4/19 1:55 PM Page 22
contoured surfaces. They are used most
effectively as a finishing sander after heavier
surface sanding and material removal is
completed. Flapwheels come in fine and
coarse grades. Buffs are a great finishing
accessory for cleaning and light sanding.
They work effectively on metal, glass, wood,
aluminum and plastics. Coarse and medium
buffs are sold together. All buffs are sold
individually. Do not exceed 15,000 RPM in
speed. 1/8" shank.
Grinding Wheel
Use for deburring, removing rust, and
general purpose grinding. Use with Mandrel
#402.
Brad Point Drill Bits
Titanium coated brad points stay on center
and begin drilling immediately. For use on
wood. Size 1/8", 5/32", 3/16", 1/4", 1/8"
shank.
HSS Drill Bits
HSS drill bit for use in metal and plastic.
Size 1/8", 7/64", 3/32", 5/64", 1/16", 3/64",
1/32". Shank size matches the drill bit size.
Different collet size (481, 482, 483) or
Dremel chuck (4486) required according to
drill bit being used.
Dremel Accessories
Diamond tipped drill bits for use on glass
and ceramic wall tile. Lubricant included.
Blows dust away for greater visibility to
work piece. Great for sanding, engraving
and carving. Do not use dust blower to stop
or slow down the tool. Do not contact dust
blower with fingers or workpiece during
use.
This chuck allows you to quickly and easily
change accessories on Dremel Rotary Tools
without
accessories with 1/32" - 1/8" shank. Read
instruction manual. Insert and securely
tighten the shank of the accessory well
within the jaws of the chuck.
22
Glass Drill Bits
Dust Blower
Dremel Chuck
changing collets. Accepts