10- Installation - Haier HTF-456WM6 User Manual

GB
10.1 Unpacking
WARNING!
▶ The appliance is heavy. Always handle with at least two persons.
▶ Keep all packaging materials out of children´s reach and dispose them in an environ-
mentally friendly manner.
▶
Take the appliance out of the packaging.
▶
Remove all packaging materials.
10.2 Environmental conditions
The room temperature should always be between 10° C and 43° C, since it can influence
the temperature inside the appliance and its energy consumption. Do not install the appli-
ance near other heat-emitting appliances (ovens, refrigerators) without isolation.
10.3 Space requirement
Required space when door is opened (Fig. 10.3):
W1=1105 mm
W2=1362 mm
D1=666 mm
D2=930 mm
10.4 Ventilaton cross-section
To achieve sufficient ventilation of the appliance for
safety reasons, the information of the required venti-
lation cross sections must be observed (Fig. 10.4).
10.5 Aligning the appliance
The appliance should be placed on a flat and solid sur-
face.
1. Tilt the appliance slightly backwards (Fig. 10.5-1.).
2. Set the feet to the desired level (Fig. 10.5-2.).
Make sure the distance to the wall on the hinge side is
at least 100 mm for the door to open properly.

10- Installation

W2
10 cm
10 cm
2.
10.3
D1
D2
W1
10.4
10 cm
10 cm
10.5
1.
max 45°
29