Advertisement
Installation Procedure
Begin by placing the ECI-60 laptop interface software CD into your CD-ROM drive.
The installation program should start automatically within a few seconds. If it does
not, you will need to run "Setup.exe" from the root directory of your CD-ROM drive.
Either double click the "Setup.exe" icon or click the Windows "Start" button and
select "Run...". Now enter "X:\setup.exe" (where X: is your CD-ROM drive), then
click the "OK" button. Follow the instructions in the installation software.
The software will place an icon on your desktop which you may use to access the
setup software.
Double click the ECI-60 icon on your desktop and the opening screen appears.
The opening screen is comprised of the menu bar, a section for selecting proces-
sors and controls for the functionality of the ECI-60 itself.
At the top of the screen is the Menu Bar. The menu bar gives access to various
functions; Under "File" is not only the usual "Load" (to load a previously construct-
ed setup) and "Save" (to save a setup you want to retain) and "Exit" (which really
needs no explanation), but also the "Processor Library". The "Processor Library"
will be explained later in this manual.
- 9 -
Advertisement
