Related Manuals for Usl ECI-60
Summary of Contents for Usl ECI-60
- Page 1 181 Bonetti Drive San Luis Obispo, CA 93401 ph: 805-549-0161 fax: 805-549-0163 e-mail:usl@uslinc.com...
- Page 2 One Year Limited Warranty USL, Inc. warrants that each product manufactured by it will be free from defects in material and workmanship under normal usage for a period of one (1) year after its purchase new from an authorized dealer. Our obligation under this warranty is limited to repairing or...
- Page 3 Table of Contents Safety Instructions...........4 Rack Mounting............6 ECI Background .............6 Front Panel Description...........7 Rear Panel Description...........8 Installation...............9 Connector Pinouts...........14 -17 Please record the following information for your records: Model: ___________________ Serial Number: ___________ Date of Purchase: ________________ Purchased from: ____________________________________ - 3 -...
- Page 4 Important Safety Instructions: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Page 5 FCC COMPLIANCE NOTICE This device complies with part 15 of the FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 6 ECI Background: The Electronic Cinema Interface (ECI) is designed to select a single input from a variety of sources and then feed the selected source into a cinema processor. The ECI provides inputs from 6 Channel Analog, 2 Channel Analog, 8 Channel Digital, Toslink, and two SPDIF sources.
- Page 7 - 7 -...
- Page 8 - 8 -...
- Page 9 Installation Procedure Begin by placing the ECI-60 laptop interface software CD into your CD-ROM drive. The installation program should start automatically within a few seconds. If it does not, you will need to run “Setup.exe” from the root directory of your CD-ROM drive.
- Page 10 “Com9” and TCP/IP if your access to the ECI-60 is through a network. ECI-60 IP Retrieval. The RS232 port can be used to retrieve the ECI-60 IP assignment and built in test status. When the unit is power on, the test results and settings are sent to the RS232 port.
- Page 11 After you have achieved connection, the Format buttons will change color and, if you are connected to a piece of equipment, you may see movement in the “Out- put Level” window. At this point, you are operating with the “Default” processor so it is now time to select a processor.
- Page 12 Selecting the “Change Settings” button will bring up the leftmost of the two dialogs. To select your processor for operation, you will need to access the drop down window as shown in the right graphic above. You may then choose a “power on” mode and “Power On Format”.
- Page 13 After you are connected, you may choose your input from any of the selectable buttons. The “Film” button acts like a bypass button and is one of two that are push on/push off. The other one is the “Mute” button. The “Input Trim”, “Output Trim”, “Input Delay”...
- Page 14 In the processor library function of the “File” menu on the main screen, you may select your processor. You may also “Add” to the list of processors or “Delete” a processor from the list. You may also choose to change a processor’s capabilities with the “Modify” win- dow.
- Page 15 - 15 -...
- Page 16 - 16 -...
- Page 17 - 17 -...
- Page 18 - 18 -...
- Page 19 - 19 -...
- Page 20 181 Bonetti Drive San Luis Obispo, CA 93401 ph: 805-549-0161 fax: 805-549-0163 e-mail:usl@uslinc.com 4/12/2010...