Technical Specifications - Dell Networking S4810 Getting Started Manual

Technical Specifications

NOTE: Operate the system at an ambient temperature not higher than 40°C.
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly
replaced.
NOTE: Replace the battery only with the same or an equivalent type. Dispose of the batteries
according to the manufacturer's instructions.
Table 1. S4810–ON Chassis Physical Design
Parameter
Height
Width
Depth
Chassis weight with factory-installed components
Rack clearance required
Table 2. Environmental Parameters
Parameter
Operating temperature
Operating humidity
Storage temperature
Relative humidity
Maximum thermal output
Maximum Altitude
Shock
Table 3. Power Requirements
Parameter
AC Power supply
Maximum current draw per system
Maximum power consumption
Typical power consumption
Technical Specifications
Specifications
1.73 inches (4.4 cm)
17.32 inches (44.0 cm)
18.11 inches (47.6 cm)
14.39 pounds (approx.) (6.54 kg)
Front: 5 inches (12.7 cm)
Rear: 5 inches (12.7 cm)
Specifications
32° to 104°F (0° to 40°C)
10–85 percent (RH), noncondensing
–40° to 158°F (–40° to 70°C)
10–85 percent, noncondensing
1194 BTH/h
No performance degradation to 10,000 feet (3,048
meters)
Meets Bellcore Zone 4 earthquake requirements
(MIL-STD-810)
Specifications
100 VAC ~ 240 VAC 50–60 Hz
4.20 A @ 100 VAC
1.70 A @ 240 VAC
350 Watts (AC)
220 Watts (AC)
3
15