Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION
Mounting the Light Fixture:
For best performance, mount the light fixture about 8 feet
(2.4 m) above the ground.
1. Press the bottom tab of the wall mounting plate and
slide the mounting plate from the light body.
2. NOTE: If needed, drill the necessary holes in the
indented areas on the wall mounting plate for the
mounting screws.
Using the wall mounting plate as a template, mark the
position of the mounting holes. Use the two screws
and wall anchors (provided) to mount the wall plate
to a solid surface. Make sure there is enough verti-
cal space above the mounting plate to allow the light
fixture to be slid down onto the mounting plate.
3. Slide the power switch located on the rear of the light
to the OFF position. Press up on the battery compart-
ment cover locking tab and swing the cover out and
down to remove.
2
AUTO
OFF
SIZE C
OPEN
PRESS TO CLOSE
Power Switch
Compartment
Battery
Cover
Locking
Tab
208882-02
Advertisement
Table of Contents
