Checking And Changing Settings: Cpwna Monitor; 4.1 - How To Access The Settings - Philips CPWNA100/00 Instructions For Use Manual

Philips wireless notebook adapter cpwna100

Hide thumbs Also See for CPWNA100/00:

Table of Contents

Chapter 4 - Checking and changing settings: CPWNA Monitor

After installing the Wireless Notebook Adapter 11a/g, you may want to

check its settings or change them.

In the following sections we will explain:

4.2 - What do the settings mean.

Please refer to the "How to..?" booklet if you want to perform basic tasks like

setting up a wireless connection.

4.1 - How to access the settings

You can access the settings by double-clicking the CPWNA Monitor

program that loads during start-up of the PC, and that stays active in the

system tray in the lower right corner of your laptop screen.

Note: if the program icon is not present in the system tray, click on

CPWNA Monitor in the Philips Wireless Network Manager program group.

System tray icon

1 The icon represents signal strength and wireless link status. In addition, it

gives you access to the Philips Wireless Network Manager and its

configuration menus.

2 Right-clicking the system tray icon displays the following options:

• Profiles (e.g. DEFAULT and others in the top part of this menu)

For choosing one of your profiles.The active profile is marked.You need to

open (click Show) the Philips Wireless Network Manager if you want to add

or delete a profile.

• Wireless On/Off:

Gives you control over enabling and disabling the wireless link

• Show: Philips Wireless Network Manager (CPWNA Monitor)

Opens the Philips utility program for viewing and changing your wireless

network adapter settings.

ENGLISH

Table of Contents

Cpwna100